BIOGAS PLANT AS GOBARDHAN :WASTE TO WEALTH
DR A. BAHADUR, NEW DELHI
Biomass resources such as cattle dung, agriculture wastes and other organic wastes have been one of the main energy sources for the mankind since the dawn of civilization. There is a vast scope to convert these energy sources into biogas. Biogas production is a clean low carbon technology for efficient management and conversion of fermentable organic wastes into clean cheap and versatile fuel and bio/organic manure.
Biogas Composition and Properties
Biogas comprises of 60-65% methane, 35-40% carbon dioxide, 0.5-1.0% hydrogen sulphide, rests of water vapours etc. Biogas is non-toxic, colour less and flammable gas. It has an ignition temperature of 650 – 750oC. Its density is 1.214kg/ m3 (assuming about 60% Methane and 40% CO2). Its calorific value is 20 MJ/m3 (or 4700 kcal.). It is almost 20% lighter than air. Biogas, like Liquefied Petroleum Gas (LPG) cannot be converted into liquid state under normal temperature and pressure. It liquefies at a pressure of about 47.4 Kg/cm2 at a critical temperature of – 82.1o C. Removing carbon dioxide, Hydrogen Sulfide, moisture and compressing it into cylinders makes it easily usable for transport applications & also for stationary applications. Already CNG technology has become easily available and therefore, bio-methane (purified biogas) which is nearly same as CNG, can be used for all applications for which CNG are used. Purified biogas (bio-methane) has a high calorific value in comparison to raw biogas.
What is biogas?
It mainly comprises of hydro-carbon which is combustible and can produce heat and energy when burnt. Bio-gas is produced through a bio-chemical process in which certain types of bacteria convert the biological wastes into useful bio-gas. Since the useful gas originates from biological process, it has been termed as bio-gas. Methane gas is the main constituent of biogas.
Biogas production process
The process of bio-gas production is anaerobic in nature and takes place in two stages. The two stages have been termed as acid formation stage and methane formation stage. In the acid formation stage, the bio-degradable complex organic compounds present in the waste materials are acted upon by a group of acid forming bacteria present in the dung. Since the organic acids are the main products in this stage, it is known as acid forming stage. In the second stage, groups of methanogenic bacteria act upon the organic acids to produce methane gas.
Raw materials for biogas production
Although, cattle dung has been recognized as the chief raw material for bio-gas plants, other materials like night-soil, poultry litter and agricultural wastes can also be used.
Advantages of biogas production
- It is a eco-friendly fuel.
- The required raw materials for biogas production are available abundantly in villages.
- It not only produces biogas, but also gives us nutrient rich slurry that can be used for crop production.
- It prevents the health hazards of smoke in poorly ventilated rural households that use dung cake and fire-wood for cooking.
- It helps to keep the environment clean, as there would be no open heap of dung or other waste materials that attract flies, insects and infections
- Availability of biogas would reduce the use of firewood and hence trees could be saved.
Components of biogas plants
- Mixing tank – The feed material (dung) is collected in the mixing tank. Sufficient water is added and the material is thoroughly mixed till a homogeneous slurry is formed.
- Inlet pipe – The substrate is discharged into the digester through the inlet pipe/tank.
- Digester – The slurry is fermented inside the digester and biogas is produced through bacterial action.
- Gas holder or gas storage dome – The biogas gets collected in the gas holder, which holds the gas until the time of consumption.
- Outlet pipe – The digested slurry is discharged into the outlet tank either through the outlet pipe or the opening provided in the digester.
- Gas pipeline – The gas pipeline carries the gas to the point of utilization, such as a stove or lamp.
Points to be considered for construction of a biogas plant
Site selection
While selecting a site for a biogas plant, following aspects should be considered
- The land should be levelled and at a higher elevation than the surroundings to avoid water stagnation
- Soil should not be too loose and should have a bearing strength of 2 kg/cm2
- It should be nearer to the intended place of gas use (eg. home or farm).
- It should also be nearer to the cattle shed/ stable for easy handling of raw materials.
- The water table should not be very high.
- Adequate supply of water should be there at the plant site. The plant should get clear sunshine during most part of the day.
- The plant site should be well ventilated.
- A minimum distance of 1.5m should be kept between the plant and any wall or foundation.
- It should be away from any tree to prevent root interference.
- It should be at least 15m away from any well used for drinking water purpose.
Availability of raw materials
The size of the biogas plant is to be decided based on availability of raw material. It is generally said that, average cattle yield is about 10 kg dung per day. For eg. the average gas production from dung may be taken as 40 lit/kg. of fresh dung. The total dung required for production of 3 m3 biogas is 3/0.04= 75 kgs. Hence, a minimum of 4 cattle is required to generate the required quantity of cow dung.
Average maximum biogas production from different feed stocks
| Sl. No. | Feed Stock | Litre /kg of dry matter | % Methane content |
| 1. | Dung | 350* | 60 |
| 2. | Night-soil | 400 | 65 |
| 3. | Poultry manure | 440 | 65 |
| 4. | Dry leaf | 450 | 44 |
| 5. | Sugar cane Trash | 750 | 45 |
| 6. | Maize straw | 800 | 46 |
| 7. | Straw Powder | 930 | 46 |
Average gas production from dung may be taken as 40 lit/kg. of fresh dung when no temperature control is provided in the plant. One Cu. m gas is equivalent to 1000 litres.
Average dung yield
| Sl. No. | Living Beings | Quantity of Dung / Night Soil produced (kg/day) |
| 1. | Cow, Heifer | 10.0 |
| 2. | Bullock | 14.0 |
| 3. | Buffalo | 15.0 |
| 4. | Young bovine | 5.0 |
| 5. | Horse | 14.0 |
| 6. | Horse, young | 6.0 |
| 7. | Pigs, over 8 score | 2.5 |
| 8. | Pigs, under 8 score | 1.0 |
| 9. | Ewes, rams and goats | 1.0 |
| 11. | Lambs | 0.5 |
| 12. | Duck | 0.1 |
| 13. | 10 hens | 0.4 |
| 14. | Human beings | 0.4 |
Note :For free grazing animals the availability of dung may be taken as 50 per cent of the amount given in the table
Requirement of cattle for various sizes of biogas plants
| Plant Size in m 3 | Minimum number of cattle required |
| 2 | 3 |
| 3 | 4 |
| 4 | 6 |
| 6 | 10 |
| 8 | 15 |
| 25 | 45 |
Carbon to Nitrogen Ratio of various materials
| Sl. No. | Material | Nitrogen Content (%) | Ratio of Carbon to Nitrogen |
| 1. | Urine | 15.18 | 8:1 |
| 2. | Cow dung | 1.7 | 25:1 |
| 3. | Poultry manure | 6.3 | N.A.* |
| 4. | Night soil | 5.5-6.5 | 8:1 |
| 5. | Grass | 4.0 | 12:1 |
| 6. | Sheep waste | 3.75 | N.A. * |
| 7. | Mustard straw | 1.5 | 20:1 |
| 8. | Potato tops | 1.5 | 25:1 |
| 9. | Wheat straw | 0.3 | 128:1 |
* N.A.:- Data Not Available
Calorific values of commonly used fuels
| Commonly used fuels | Calorific values in Kilo calories | Thermal efficiency |
| Bio-gas | 4713/M3 | 60% |
| Dung cake | 2093/Kg | 11% |
| Firewood | 4978/Kg | 17.3% |
| Diesel (HSD) | 10550/Kg | 66% |
| Kerosene | 10850/Kg | 50% |
| Petrol | 11100/Kg | — |
Equivalent quantity of fuel for 1 m3 of biogas
| Name of the fuel | Kerosene | Fire-wood | Cowdung cakes | Charcoal | Soft coke | Butane | Furnace Oil | Coal gas | Electricity |
| Equivalent quantities to 1 m3 of Bio-gas | 0.620 | 3.474 kg | 12.296 kg | 1.458 kg | 1.605 kg | 0.433 kg | 0.4171 | 1.177 m3 | 4.698 kWh |
Biogas Requirements
| Sl. No. | Use | Quantity requirement |
| 1. | Cooking | 336 – 430 1/ day / person |
| 2. | Gas Stove | 330 1/ hr /5 cm burner |
| 470 1/hr/10 cm burner | ||
| 640 1/hr/15 cm burner | ||
| 3. | Burner Gas Lamp | 126 1/lamp of lighting equivalent to 100 watt filament lamp. |
| 70 1/hr/1 mantle lamp | ||
| 140 1/hr/2 mantle lamp | ||
| 1691/lir/3 mantle lamp | ||
| 4. | Dual fuel engine | 425 1/hp/hr |
A format for cost estimation for establishing biogas plants
Model:
| Sr. No. | Item | Quantity | Rate/Unit Quantity | Cost |
| 1. | Earth Work | |||
| 2. | Bricks | |||
| 3. | Cement | |||
| 4. | Sand | |||
| 5. | Morrum/ Stones | |||
| 6. | Skilled labour days for construction of plant | |||
| 7. | Unskilled labour days for plant construction | |||
| 8. | A.C. Pipes (when required) | |||
| 9. | Gas holder | |||
| 10. | Pipes & fittings with. sizes | |||
| 11. | Gas burner/chullah | |||
| 12. | Gas lamp (when required) | |||
| 13. | Any other item, if required with specific details | |||
| 14. | Transportation charges |
Technical guidelines for establishment of Biogas plants
- Digester Design
- The recommendation of KVIC is to have a digester volume of 2.75 times the volume of gas produced per day.
- KVIC recommendation for the depth of the plant is between 4 to 6 m according to the size but for economical use of building materials, a depth to diameter ratio between 1.0 to 1.3 are considered ideal for all types of plants. In a floating drum plant, a continuous ledge is built into the digester at a depth 10 cm. shorter than the height of the gas drum to prevent the gas holder from going down when no gas is left in it. It helps in preventing the gas inlet being choked. It also guides the gas bubbles rising from the side of the plants into the gas bolder.
- In some plants slurry is fed at the bottom and removed at the top. When the digester diameter exceeds 1.6 m, a partition wall is provided in the digester to prevent short circuiting of slurry flow and increasing its retention period. In case of fixed dome plants, the volume of digester comes to between 1.5 times to 2.75 times the gas produced per day. Here, the higher the plant capacity, the lesser becomes the ratio of digester volume to gas produced per day.
- Gas Holder Design
- The design of a gas holder is influenced by the digester diameter and distribution of gas use during the day. For domestic plants, the gas holder capacity is kept at 60 per cent of a day’s gas production and in case of laboratories, it is kept at 70 per cent of the day’s gas production.
- In a floating drum plant, the gas holder diameter is 15 cm. less than the diameter of the digester and accordingly the other dimensions are decided. The gas holder can be given a rotary movement around its guide to break the scum formation at the top.
- In a fixed dome plant the dome angle is kept between 17° and 21° and it gives a pressure upto 100 cm. of water. Due to higher pressure, the diameter of gas pipelines can be reduced and the gas can be taken to greater distance. In this plant, care should be taken to provide an earth pressure equivalent to 100 cm of water column from the top of the dome. Always use ‘A’ class bricks in the domes for better stability.
iii. Inlet Tank
- Before the dung is fed into the plant, it is mixed with water in a tank to give a solid content of 7.5 per cent to 10 per cent in the slurry. This tank also helps in removing grass and other floating materials from the raw materials to prevent excessive scum formation in the plant. This tank is connected to the digester by an asbestos cement pipe. The floor of the mixing tank is given a slope opposite to the direction of inlet pipe to help heavy inorganic solid particles to settle and get separated from the slurry.
Nutrient status of Biogas slurry
| N | P2O5 | K2O | |
| Bio-gas slurry | 1.4 | 1.0 | 0.8 |
| Farm Yard Manure (FYM) | 0.5 | 0.2 | 0.5 |
| Town Compost | 1.5 | 1.0 | 1.5 |
Shakthi – Surabhi – Biogas plant for households
Shakthi-Surabhi is a kitchen waste based biogas plant. It works on similar principles of a traditional biogas plant, but has been modified to suit urban requirements also. The unit consists of an inlet waste feed pipe, a digester, gas holder, water jacket, a gas delivery system and an outlet pipe. It is developed by the Vivekananda Kendra, Natural Resources Development Project (Vknardep), Kanyakumari, Tamil Nadu.
In what way does this unit promise to be a better alternative to the conventional biogas plants?
- Cattle dung is a major input for the conventional plants. And everyday the dung should be mixed as slurry and poured into the gas tank. But for Shakthi-surabhi, cattle dung is required for initial charging. Later on, kitchen and other wastes (leftover cooked food (veg and non-veg), vegetable wastes, material from flour mills, non edible oil seed cakes (neem, jatropha etc)) alone are sufficient for producing the required gas.
- The unit comes in two attractive colours in capacities from 500 to 1,500 litres.
- It is easy to fix or relocate and can be installed either at the backyard (if it is an independent house) or in the terrace or sunshade in flat structures.
- Required feed materials
Performance :
About 5 kg of waste is required for a 1 cubic metre plant which is equal to 0.43 kg of LPG. It is estimated that 100 cubic metres of biogas could produce 5 KW of energy to meet a 20-hour power requirement of a house The process is hygienic and is devoid of odour and flies. The unit also helps in controlling climate change effects and arrests green house gases, and the digested outlet slurry of the unit acts as good organic manure
For more details, contact :
Vivekananda Kendra, -Natural Resources Development Project,
VK-Nardep, Vivekanandapuram, Kanyakumari – 629 702, Tamil Nadu,
Email. vknardep@gmail.com
Phone: 04652 246296 and 04652 -247126.
Source : The Hindu
Biogas enrichment and bottling technology – a pilot demonstration unit
Shri Krishna Gaushala is located at Karera Village in Ghaziabad. It is a pilot demonstration unit of Ministry of New and Renewable Energy ( Govt of India) with the technology of IIT, Delhi.
The Gaushala has a herd of around 1000 cows. There are two sheds for cows and one shed for calves, separate shed for bulls, shed for vermin-composting and compost pit, urine collection centre, three biogas plants (85+85+60 cum /day capacity), slurry collection tank, and a biogas purification and bottling unit.
- 5 ton Cow Dung is used for the feeding of Biogas Plants (Capacity).
- Biogas is purified and bottled with a Biogas Purification (water scrubbing system – capacity – 20 cum/hr) & Bottling Unit and used as fuel in vehicles –3)
- Bio-Gas produced is also used for Power Generation with the help of genset.
- The Biogas plant Spent Slurry (rich in nutrients than fresh cow dung) is used as Manure for plantation in gaushala and all around it and this slurry is also vermin-composted and marketed.
Biogas plants at Gaushala
Vermicomposting shed
Biogas scrubbing unit and Compression unit at 200 bar
For Technical Information:
Dr V.K.Vijay
Centre for Rural Development and Technology Indian Institute of Technology Delhi – 110016 India
Email: vkvijay@rdat.iitd.ernet.in , + 91 9871366611
Goshala unit: Mr Ved Prakash Goyal Secretary, Shri Krishna Gaushala, Ghaziabad Mobile: + 91 9871093284
Kitchen Waste Based Biogas Plant
A kitchen waste based biogas plant has been installed at Nursery site for environmental friendly disposal of the waste generated in kitchens of various canteens in BARC premises. It is expected that the plant can process all the waste generated in these canteens.
The biogas plant has following components:
- A mixer/pulper (5 HP motor) for crushing the solid waste
- Premix tanks
- Predigester tank
- Solar heater for water heating
- Main digestion tank (35 m3)
- Manure pits
- Gas lamps for utilisation of the biogas generated in the plant.
Process: The waste generated in kitchen in the form of vegetable refuge, stale cooked and uncooked food, extracted tea powder, waste milk and milk products can all be processed in this plant.
Precautions may be taken while collecting the kitchen waste :
- A separate container for coconut shells, coir, egg shells, onion peels and bones. These will not be processed in the biogas plant.
- Separate containers of small volumes (5 litre capacity) to collect the wet waste (spoilt or stale cooked food, waste milk products etc.). The vegetables refuse like peels of various vegetables, rotten potatoes, and tomatoes, coriander leaves etc. may be collected in garbage bags of 5-kilo capacity. It must be noted that such segregation is of utmost importance for smooth running of the biogas plant.
There are two important modifications made in the conventional design of the biogas plant in BARC :
- Introduction of a 5 HP mixer to process the waste before putting it into predigestor tank. The waste is converted in slurry by mixing with water (1:1) in this mixture.
- Use of thermophilic microbes for faster degradation of the waste. The thermophiles can thrive superbly at high temperatures. Since the environment for such micro-organisms sustains higher temperatures, many spoilage and pathogenic organisms cannot survive in such extreme conditions. Therefore it would be ideal if we can make use of these organisms to degrade the kitchen waste to remove more toxic elements and then subject it to the traditional biogas plant for methane generation.
A high temperature is maintained in the predigestor tank. The growth of thermophiles in the predigestor tank is assured by mixing the waste with hot water and maintaining the temperature in the range of 55-60oC. The hot water supply is from a solar heater. Even one-hour sunlight is sufficient per day to meet the needs of hot water.
Another important aspect in smoother running of a biogas plant based on solid waste is how effectively one can avoid the choking of the plant. This choking may occur due to thick biomass that may be inaccessible to the micro-organisms to digest it. The logical solution to such a problem is to convert the solid waste into slurry that would be far more accessible for the microbial action. A high power mixer to convert the solid waste into slurry can achieve this purpose.
After the predigestor tank, the slurry enters the main tank where it undergoes mainly anaerobic degradation by a consortium of archaebacteria belonging to Methanococcus group. These bacteria are naturally present in the alimentary canal of ruminant animals (cattle). They produce mainly methane from the cellulosic materials in the slurry.
The undigested lignocellulosic and hemicellulosic materials then are passed on in the settling tank. After about a month high quality manure can be dug out from the settling tanks. There is no odour to the manure at all. The organic contents are high and this can improve the quality of humus in soil, which in turn is responsible for the fertility.
As the gas is generated in the main tank, the dome is slowly lifted up. It reaches a maximum height of 8 feet holding 35 m3 of gas. This gas is a mixture of methane (70-75%), carbon-di-oxide (10-15%) and water vapours (5-10%). It is taken through GI pipeline to the lamp posts. Drains for condensed water vapour are provided on line. This gas burns with a blue flame and can be used for cooking as well. The gas generated in this plant is used for gas lights fitted around the plant. The potential use of this gas would be for a canteen. The manure generated is high quality and can be used in fields.
Success of this biogas plant depends a great deal on proper segregation of the kitchen waste. The materials that can pose problems to the efficient running of plant are coconut shells and coir, egg shells, onion peels, bones and plastic pieces. Steel utensils like dishes, spoons etc. are likely to appear in the waste bags from canteens. While bones, shells and utensils can spoil the mixer physically, onion peels, coir and plastic can have detrimental effects on microbial consortium in the predigester and main digestion tanks which could be disastrous for the plant.
Source : DAE
GOBAR-DHAN scheme
Ministry of Drinking Water & Sanitation has launched the GOBAR (Galvanizing Organic Bio-Agro Resources) – DHAN scheme. The scheme is being implemented as part of the Swachh Bharat Mission (Gramin).
The Swachh Bharat Mission (Gramin) comprises two main components for creating clean villages – creating open defecation free (ODF) villages and managing solid and liquid waste in villages. With over 3.5 lakh villages, 374 districts and 16 States/UTsof the country being declared ODF, the stage is set for ODF-plus activities, including measures to enhance Solid and Liquid Waste Management (SLWM). The GOBAR-DHAN scheme, with its focus on keeping villages clean, increasing the income of rural households, and generation of energy from cattle waste, is an important element of this ODF-plus strategy.
Aim
The scheme aims to positively impact village cleanliness and generate wealth and energy from cattle and organic waste. The scheme also aims at creating new rural livelihood opportunities and enhancing income for farmers and other rural people.
Implementation
The programme will be implemented using SLWM funding pattern of SBM-G Guidelines. The total assistance under SBM (G) for SLWM projects is worked out on the basis of total number of households in each GP, subject to a maximum of Rs 7 lakh for a GP having up to 150 households, Rs.12 lakh up to 300 households, Rs. 15 lakh up to 500 households and Rs.20 lakh for GPs having more than 500 households. Funding for SLWM project under SBM (G) will continue to be provided by the Central and State Government in the ratio of 60:40 as per the existent formula.
Only those Gram Panchayats which have not availed SLWM funds under SBM(G) are eligible to receive the financial assistance under GOBAR-Dhan scheme, subject to the limits of guidelines. However, States shall have the flexibility to provide additional funds to any GP based on viability under the scheme.
Support from the scheme
There are 4 Models for implementation of the projects. As per GOBAR-DHAN guidelines, the Model wise incentive is as under:
- Model-A (Gram Panchayat): Rs. 7 lakh, Rs. 12 lakh, Rs. 15 lakh and Rs. 20.00 lakh for a GP having households up to 150, 300, 500 and more than 500 respectively.
- Model-B (SHG Federation): Rs. 7 lakh, Rs. 12 lakh, Rs. 15 lakh and Rs. 20.00 lakh for a GP having households up to 150, 300, 500 and more than 500 respectively.
- Model-C (Bulk Waste Generator/ Entrepreneur) is Rs. Rs. 7 lakh, Rs. 12 lakh, Rs. 15 lakh and Rs. 20.00 lakh for a GP having households up to 150, 300, 500 and more than 500 respectively.
- Model-D (Any Eligible Enterprise): No incentive
FOR MORE DETAIL ,PLZ VISIT:https://sbm.gov.in/gbdw20/images/Framework/Gobardhan.pdf
Source : Department of Drinking Water and Sanitation, Ministry of Jal Shakti
https://www.pashudhanpraharee.com/galvanizing-organic-bio-agro-resources-dhan-gobar-dhan/
